Filter
Top Products
Smart Control Operation
3A2090A Operation 29
Marker Mode
1. Press the MODE key to select Parking Layout
Mode.
2. Press SETUP three times to select Marker Layout
Mode.
3. Use SELECT and EDIT keys to set up reflective
marker pattern.
Automatic marker layout example shows typical lane
line layout for reflective markers. Set space sizes up
to 8 consecutive measurements. By leaving zeros in
any space, AutoLayout will skip to the next
measurement in a continuous loop.
OTHER USES:
• Multiple spaced handicap stall layout
• Double line stalls
4. Press gun trigger control and move striper forward
to mark dots. Press gun trigger control again to stop
marking dots.
s
ti19136a
ti19137a
ti10291b
ti18507a
48.00’
8.00’
16.00’
4.00’
8.00’
8.00’ 8.00’
4.00’
ti18564a
ti18717a