Filter
Top Products
• Rotate the seat back and lift to remove from the vehicle.
3
• Slide a hubcap, peg side up, onto the rear axle.
• Slide a wheel, ribs up, onto the rear axle.
• Slide a rear wheel driver, ring side down, onto the
rear axle.
2
Rear Wheel Driver
(Ring Side Down)
Wheel
(Ribs Up)
Hubcap
(Peg Side Up)
Seat
Vehicle
Rear Axle
Front View
WARNING
Children can be harmed by small parts,
sharp edges and sharp points in the
vehicle’s unassembled state, or by electrical
items. Care should be taken in unpacking
and assembly of the vehicle. Children
should not handle parts, including the
battery, or help in assembly of the vehicle.
Assembly
F
1
Rear Axle
.437 Cap Nut
• Place a .437 cap nut on a flat surface, inside up.
• Fit the end of the rear axle into the cap nut.
• Tap the opposite end of the rear axle with a hammer to
secure the cap nut on the rear axle. Pull on the cap nut to
be sure it’s secure.
.437"
9