Filter
Top Products
• Fit the pretend engine into the front end of the vehicle.
• Insert two 1" bolts into the pretend engine.
• Tighten the screws.
30
• Fit a peg on the hood into a slot in the front end of
the vehicle.
• Flex the hood slightly and then insert the other hood peg
into the other slot in the front end of the vehicle.
• Lower the hood. Push down near the front of the hood to
“snap” into place.
31
Assembly
Pretend
Engine
Hood Peg
Slot
16
• Insert three #8 x
3
/
4
" screws into the windshield.
• Tighten the screws.
29
• Insert and “snap” the tabs at the top of the windshield into
the slots in the top edge of the vehicle.
28
Slots
Windshield
Front View