Filter
Top Products
• Turn the vehicle upright.
• Insert the tabs on the front edge of the seat into the floor
of the vehicle.
Assembly
13
17
19
• Lift the front end of the vehicle.
• Insert the straight end of the steering column through
the hole in the vehicle and out through the hole in
the dashboard.
• Hook the curved end of the steering column into the hole
in the steering linkage.
Tabs
Seat
Straight End of Steering Column
Hole
Curved
End
Steering
Linkage
Hole
Bottom View
• Insert four #8 x
3
/
4
" screws into the seat.
• Tighten the screws.
18
• Fit and snap a hubcap cover to the hubcap.
• Repeat Assembly steps 13-16 to assemble a washer,
bushing, wheel, hubcap, cap nut and hubcap cover to the
other front axle.
16
Hubcap
Cover