Filter
Top Products
• Insert the battery connector into the charger connector .
• Plug the charger into a standard wall outlet .
Note: If power flow to the wall outlet is controlled by a
switch, make sure the switch is “ON”.
• Before first-time use, charge the battery for at least 18
hours. Never charge the battery longer than 30 hours.
• Recharge the battery for at least 14 hours after each
use of your vehicle. Do not charge the battery longer
than 30 hours.
• Once the battery is charged, disconnect the battery
connector from the charger connector. Unplug the
charger from the wall outlet. The battery is now ready
to be installed in your vehicle. Please see the Battery
Installation section on page 20 for detailed instructions
on installing your battery. If your battery is already
installed in your vehicle, simply re-connect the motor
harness connector to the battery.
11
2
11
1
Charger
Connector
11
2
Battery Charging
8
11
1
Battery
Connector