Filter
Top Products
Assembly
• Turn the steering linkage so that the inside (grooved side)
is facing up.
• Position each front axle so that the short end is facing up.
• Insert the short end of the front axles up through the ends
of the steering linkage, as shown.
Front Axle Short End
Steering Linkage
• Slide a
7
/
16
" washer onto the short end of each front axle.
• Fit the steering linkage cover onto the front axles.
Note: The steering linkage cover should still face you.
Front
Axle
Front
Axle
Steering
Linkage
Cover
7
/
16
"
Washer
7
/
16
"
Washer
• Fit a .437 cap nut onto the end of a front axle.
• Tap the cap nut with a hammer to secure it to the end of
the front axle.
• Repeat this procedure to fasten another .437 cap nut to
the other front axle.
Front Axle
.437
Cap
Nut
11
11
9
10
.437"
• Fit and snap a hubcap cover to each hubcap.
8
Hubcap Cover
Hubcap Cover