34
• Peel and remove the backing from the fasteners.
• Apply the fasteners to the back end, top edge of the
vehicle, as shown.
• Throw away the backing.
Assembly
17
Fasteners
Left Side View
• Lift the front end of the vehicle.
• Insert two #8 x
3
/
4
" screws into the brushguard, as shown.
• Lower the vehicle.
33
Brushguard
Bottom View
#8 x
3
/
4
"
Screws
• Fit the brushguard to the front end of the vehicle.
• Insert two #8 x
3
/
4
" screws into the brushguard.
• Tighten the screws.
32
Brushguard
35
Tonneau
• Fit the tonneau on the back end of the vehicle.
• Place a
3
/
16
" washer on two #8 x
3
/
4
" screws.
• Insert the screws through the holes in the tonneau and
into the vehicle.
• Tighten the screws.