D-Link DAP-2690 Breast Pump User Manual


 
59D-Link DAP-2690 User Manual
Section 3 - Conguration
DHCP Server
Function
Enable/Disable:
IP Assigned
From:
The Range of
Pool (1-254):
Subnet Mask:
Gateway:
WINS:
DNS:
Dynamic Host Configuration Protocol (DHCP) assigns
dynamic IP addresses to devices on the network. This
protocol simplies network management and allows new
wireless devices to receive IP addresses automatically
without the need to manually assign new IP addresses.
Select Enable to allow the DAP-2690 to function as a DHCP
server.
Input the rst IP address available for assignment on your
network.
Enter the number of IP addresses available for assignment.
IP addresses are increments of the IP address specied in
the “IP Assigned From” eld.
All devices in the network must have the same subnet mask
to communicate. Enter the submask for the network here.
Enter the IP address of the gateway on the network.
Specify the Windows Internet Naming Service (WINS) server
address for the wireless network. WINS is a system that
determines the IP address of a network computer that has
a dynamically assigned IP address.
Enter the IP address of the Domain Name System (DNS)
server. The DNS server translates domain names such as
www.dlink.com into IP addresses.
The DHCP address pool denes the range of the IP address that can be assigned to stations in the network. A Dynamic Pool allows wireless stations
to receive an available IP with lease time control. Once a user is nished, click the Save button to let the changes take eect.
Dynamic Pool Settings