D-Link DAP-2690 Breast Pump User Manual


 
18D-Link DAP-2690 User Manual
Section 3 - Conguration
Allows selection of the channel width you would like to operate in. 20 MHz and Auto 20/40 MHz allow both 802.11n and non-802.11n
wireless devices on your network when the wireless mode is Mixed 802.11 b/g/n in 2.4G and Mixed 802.11 a/n in 5G. 802.11n wireless
devices are allowed to transmit data using 40 MHz when the channel width is Auto 20/40 MHz.
Manually enter the MAC addresses of the APs on your network that will serve as bridges to wirelessly connect multiple networks. You
may also click the Scan button to search for available wireless networks, then click on the available network that you want to connect to.
Use the drop-down menu to choose Open System, Shared Key, or WPA-Personal.
Select Open System to communicate the key across the network.
Select Shared Key to limit communication to only those devices that share the same WEP settings. If multi-SSID is enabled, this option
is not available.
Select WPA-Personal to secure your network using a password and dynamic key changes. No RADIUS server is required.
For more information about the dierent types of Authentication oered on the DAP-2690 and the respective settings of each, please
go to the rst page of the “Authentication” explanations, which begins on page 23.
Remote AP MAC
Address:
Site Survey:
Authentication: