Filter
Top Products
32D-Link DAP-2690 User Manual
Section 3 - Conguration
Multi-SSID
The device supports up to eight multiple Service Set Identiers. You can set the Primary SSID in the Basic > Wireless section. The SSID’s factory
default setting is dlink. The SSID can be easily changed to connect to an existing wireless network or to establish a new wireless network. When
the information for the new SSID is nished, click the Add button. Click the Save button to let your changes take eect.
Check to enable support for multiple SSIDs.
Check to enable the priority feature.
This read-only value is the current band setting.
You can select up to seven multi-SSIDs. With the
Primary SSID, you have a total of eight multi-SSIDs.
Service Set Identier (SSID) is the name designated
for a specic wireless local area network (WLAN). The
SSID’s factory default setting is dlink. The SSID can
be easily changed to connect to an existing wireless
network.
Enable or Disable SSID visibility. Enabling this feature
broadcasts the SSID across the network, thus making
it visible to all network users.
The Multi-SSID security can be Open System,
WPA-Personal, WPA-Enterprise, or 802.1X. For a
detailed description of the Open System parameters
please go to page 23. For a detailed description of
the WPA-Personal parameters please go to page
24. For a detailed description of the WPA-Enterprise
parameters please go to page 25. For a detailed
description of the 802.1X parameters please go to
page 26.
Enable Multi-SSID:
Enable Priority:
Band:
Index:
SSID:
SSID Visibility:
Security: