D-Link DAP-2690 Breast Pump User Manual


 
15D-Link DAP-2690 User Manual
Section 3 - Conguration
Wireless Settings
Wireless Band:
Mode:
Network Name
(SSID):
SSID Visibility:
Auto Channel
Selection:
Channel:
Channel Width:
Captive Prole:
Select either 2.4 GHz or 5 GHz from the drop-down menu.
Select Access Point from the drop-down menu. The other three choices
are WDS with AP, WDS, and Wireless Client.
Service Set Identier (SSID) is the name designated for a specic wireless
local area network (WLAN). The SSID’s default setting is dlink. The SSID
can easily be changed to connect to an existing wireless network or to
establish a new wireless network. The SSID can be up to 32 characters
and is case-sensitive.
Enable or Disable SSID visibility. Enabling this feature broadcasts the SSID
across the network, thus making it visible to all network users.
Enabling this feature automatically selects the channel that provides the
best wireless performance. Enable is set by default. The channel selection
process only occurs when the AP is booting up.
All devices on the network must share the same channel. To change the
channel, rst toggle the Auto Channel Selection setting to Disable, and
then use the drop-down menu to make the desired selection.
Note: The wireless adapters will automatically scan and match the wireless
settings.)
Allows selection of the channel width you would like to operate in. 20
MHz and Auto 20/40 MHz allow both 802.11n and non-802.11n wireless
devices on your network when the wireless mode is Mixed 802.11 b/g/n
in 2.4G and Mixed 802.11 a/n in 5G. When the channel width is set to
Auto 20/40 MHz, then 802.11n wireless devices are allowed to transmit
data using 40 MHz.
Enable or disable captive prole for user authentication.
In Access Point mode, the DAP-2690 functions as a wireless AP. After conguring the desired settings, click the Save button.
Access Point Mode