Filter
Top Products
19D-Link DAP-2690 User Manual
Section 3 - Conguration
WDS Mode
In WDS mode, the DAP-2690 wirelessly connects multiple networks, without functioning as a wireless AP. After completing the desired settings,
click the Save button to let your changes take eect.
Wireless Band:
Mode:
Network Name
(SSID):
SSID Visibility:
Auto Channel
Selection:
Channel:
Channel Width:
Captive Prole:
Select either 2.4 GHz or 5 GHz from the drop-down menu.
WDS is selected from the drop-down menu.
Service Set Identier (SSID) is the name designated for a
specic wireless local area network (WLAN). The SSID’s
factory default setting is dlink. The SSID can be easily
changed to connect to an existing wireless network or to
establish a new wireless network.
Enable or Disable SSID visibility. Enabling this feature
broadcasts the SSID across the network, thus making it
visible to all network users.
Enabling this feature automatically selects the channel that
will provide the best wireless performance. This feature is
not supported in WDS mode.
All devices on the network must share the same channel.
To change the channel, use the drop-down menu to make
the desired selection.
Allows selection of the channel width you would like to
operate in. 20 MHz and Auto 20/40 MHz allow both
802.11n and non-802.11n wireless devices on your network
when the wireless mode is Mixed 802.11 b/g/n in 2.4G and
Mixed 802.11 a/n in 5G. 802.11n wireless devices are allowed
to transmit data using 40 MHz when the channel width is
Auto 20/40 MHz.
Disable in WDS mode.