93
RP360 / RP360 XP
Vibrato/Rotary
Vibrato is an effect that modulates the pitch of the incoming signal at an even rate, taking the whole
signal slightly in and out of tune at a steady pace� A Rotary effect emulates a device that included a
spinning horn and woofer� The rotation of these two speakers produced an interesting combination
of the sound panning from side to side� This also produced a slight pitch change due to the speed of
the sound coming towards, and then going away from the listener, known as the Doppler effect� The
following provides a description of the vibrato/rotary models available in the RPs and their associated
parameters�
MODULATION – VIBRATO/ROTARY MODELS
• Vibrato
The Vibrato effect produces varying changes in pitch� This effect can be found on countless surf
and country classics�
Parameters
NAME OPTIONS OR RANGE DESCRIPTION
ON/BYP ON, BYPASS Turns the effect on and off�
SPEED 0 - 99 Adjusts the speed of the modulation�
INTENSTY 0 - 99 Adjusts the strength of the effect�
•
Rotator
The Rotator effect simulates the Doppler effect and volume fluctuations of a rotary speaker�
This effect is lush and full�
Parameters
NAME OPTIONS OR RANGE DESCRIPTION
ON/BYP ON, BYPASS Turns the effect on and off�
SPEED 0 - 99 Adjusts the rate of the spinning speaker/horn�
INTENSTY 0 - 99 Adjusts the strength of the effect�
DOPPLER 0 - 99
Adjusts the amount of change in pitch variation� Higher values
introduce a higher degree of pitch shifting�
X OVER 0 - 99
Selects the crossover frequency between the horn and rotor, changing
the tone of the effect�