Filter
Top Products
73
RP360 / RP360 XP
DELAY MODELS
• Lo Fi Delay
The Lo Fi delay is an analog delay with a severely limited frequency response, producing an
even grungier delay effect�
Parameters
NAME OPTIONS OR RANGE DESCRIPTION
ON/BYP ON, BYPASS Turns the effect on and off�
TIME 0 - 5�000 SEC Sets the delay time�
REPEATS 0 - 99, HOLD
Sets how many delay repeats will occur� The lowest value equals one
repeat� Higher values equal more repeats and the highest value equals
repeat hold (infinite repeats)�
LEVEL 0 - 99 Adjusts the output level of the effect�
TAP DIV
3 QUARTER,
EIGHT, DOT EIGHT,
QUARTER, HALF
Sets the delay tap divider rate or the note value at which the delay will
occur�
•
2-Tap Delay
While most delays are derived from a signal delay with one end tap, the 2-Tap Delay uses a
single delay line, but with two end points that are spaced about at different ratios� Use this
effect to add more of a rhythmic quality to your delays�
Parameters
NAME OPTIONS OR RANGE DESCRIPTION
ON/BYP ON, BYPASS Turns the effect on and off�
TIME 0 - 5�000 SEC Sets the delay time�
REPEATS 0 - 99, HOLD
Sets how many delay repeats will occur� The lowest value equals one
repeat� Higher values equal more repeats and the highest value equals
repeat hold (infinite repeats)�
LEVEL 0 - 99 Adjusts the output level of the effect�
RATIO 0% - 99%
Adjusts the distance between the two delay taps� Higher values create
greater distance between the taps�
TAP DIV
3 QUARTER,
EIGHT, DOT EIGHT,
QUARTER, HALF
Sets the delay tap divider rate or the note value at which the delay will
occur�