Filter
Top Products
Using the Function Menu
E-131
4.
To exit the function menu, press the R-13
(FUNCTION) button or R-15 (EXIT) button.
• Note that all function menu settings you configure are
returned to their initial defaults whenever you turn off
the Digital Keyboard. You can configure the Digital
Keyboard so it remembers its latest settings or to apply
predetermined default settings each time you turn it on.
For details, see “AutoResume (Auto Resume)” (page
E-134) and “Default (Default Settings)” (page E-134).
• Some function menu settings also can be saved to
registration memory. For details, see “Saving
Keyboard Setups to Registration Memory” (page E-66).
This section explains the meaning of each function menu
setting item, and provides information about setting ranges
and initial default values.
• For each item, the initial default setting is indicated by an
asterisk (*).
Fine tunes the overall keyboard tuning in 0.1 Hz steps.
A4=415.5 - 440.0
*
- 465.9 Hz
• Changing the tuning value does not affect audio playback
(page E-126).
One of five presets can be selected to change the overall
frequency characteristics of the sound.
• You can directly display this group screen without going
through the function menu. While the initial power on
screen is displayed, hold down the R-13 (FUNCTION)
button as you press the C-17 (MENU) button.
Select one of the settings below to specify the relationship
between key pressure and note volume.
Specifies the velocity value setting when the Touch setting is
off.
000 - 100
*
- 127
■Ped.Assign (Pedal Assign)
Specifies the operation of the pedal connected to T-3
(SUSTAIN/ASSIGNABLE JACK).
■Upper1, Upper2, Lower, A.HAR.
These settings specially on* (effect applied) or oFF (effect not
applied) for the UPPER 1, UPPER 2, LOWER, and Auto
Harmonize parts for the operation currently assigned to the
pedal.
• When the Pedal Assign setting is “rHy”, the on/off settings
of these parts are disabled, and the pedal functions as a
rhythm start/stop switch.
Function Menu Settings
Tune (Tuning)
EQ (Equalizer)
oFF
*
:Equalizer off
Soft :Suppressed high tones for a softer sound
Bright :Enhanced high tones for a brighter sound
B.Boost :Enhanced low tones (Bass Boost)
Powerful:Enhanced volume
Lights
Performance (Performance/Accompaniment)
Group
Touch (Touch Response)
oFF: Constant note volume regardless of keyboard pressure
1
*
:Normal
2 : Strong sound even with light pressure
TchOffVel (Touch Off Velocity)
Ped.Setting (Pedal Setting)
SUS
*
: Sustain pedal
SSt : Sostenuto pedal
SFt : Soft pedal
rHy :Rhythm start/stop switch
Upper1: UPPER 1
Upper2: UPPER 2
Lower :LOWER
A.HAR.: Auto Harmonize
B
CTK7200_e.book 131 ページ ２０１４年３月７日 金曜日 午後３時４分