Casio WK-7600 Musical Toy Instrument User Manual


 
Recording and Playing Audio
E-125
1.
Perform the procedure under “To get ready for
audio recording” (page E-123).
This enters the rhythm mode.
2.
Perform steps 1 through 4 under “To perform
using a music preset” (page E-54).
This enters music preset record standby.
3.
Perform steps 3 through 6 under “To record
play in the rhythm mode” (page E-123) to start
recording.
4.
Perform steps 5 through 7 under “To perform
using a music preset” (page E-54).
5.
To quit recording, press the C-2 (AUDIO
RECORD) button.
1.
Perform the procedure under “To get ready for
audio recording” (page E-123).
This enters the rhythm mode.
2.
Perform steps 1 through 3 under “To play a
recorded song” (page E-79) to prepare for song
playback.
This enters the song sequencer mode.
3.
Perform steps 3 through 6 under “To record
play in the rhythm mode” (page E-123) to start
recording.
4.
Press the L-16 (START/STOP) button to start
song playback.
5.
To quit recording, press the C-2 (AUDIO
RECORD) button.
You can use the operations in this section to navigate
between modes and screens while recording.
Rhythm Mode Operations (: indicator
displayed)
Operations in the Rhythm Mode
You can use the R-17 (t, y) buttons to switch between
the audio record screen and the rhythm mode screen.
While the audio record screen is displayed, press the C-9
(CARD) button to display the rhythm mode screen.
Displaying the Song Sequencer Mode Screen from the
Rhythm Mode Screen
While the audio record screen or rhythm mode screen is
displayed, press the C-4 (SONG SEQUENCER) button to
display the song sequencer mode screen. This will cause
the : indicator to disappear from the display and the
< indicator to appear.
Song Sequencer Mode Operations (<
indicator displayed)
Operations in the Song Sequencer Mode
You can use the R-17 (t, y) buttons to switch between
the audio record screen and the song sequencer mode
screen.
While the song sequencer mode screen is displayed, press
the C-4 (SONG SEQUENCER) button to display the audio
record screen.
Displaying the Rhythm Mode Screen from the Song
Sequencer Mode Screen
While the audio record screen or song sequencer mode
screen is displayed, press the C-9 (CARD) button to display
the rhythm mode screen. This will cause the <
indicator to disappear from the display and the :
indicator to appear.
While the audio record screen or rhythm mode screen is
displayed, press the C-4 (SONG SEQUENCER) button to
display the rhythm mode screen. This will cause the
< indicator to disappear from the display and the
: indicator to appear. The screen content does not
change at this time.
To record play using a music preset
To record play in the song sequencer mode
Navigating between Modes and Screens
during Recording Standby and Recording
CTK7200_e.book 125 ページ 2014年3月7日 金曜日 午後3時4分