Britax 85 SICT Car Seat User Manual


 
46 47
11 Reattach the clips behind the
arm rests and slide the fabric
under the lower belt guides.
Buckle Removal
1 Locate the metal retainer on the
bottom of the child seat, and
slide the retainer up to release it
from the child seat shell.
2 Turn and push the buckle
retainer through the shell and
cover to the top of the seat.
* Pull the belly pad over the
buckle retainer to remove.
Cleaning the Buckle
If your child eats and drinks while in the child seat, you may need
to check the buckle periodically and rinse out any accumulated
debris or dried liquids.
Buckle Replacement
1 Select the slot closest to, but not under the child.
To Clean:
•THOROUGHLY RINSE the buckle using warm water.
•TEST THE BUCKLE by fastening and unfastening until a positive
click is heard after inserting each buckle tongue. If clicks are not
heard, repeat the cleaning procedure.
•TOWEL DRY
•DO NOT:
* Soak
* Lubricate
* Use solvents
* Use soap or household detergents
2
Turn and push the buckle
retainer through the slots in
the cover and shell to the
bottom of the child seat.
3 Pull the buckle away from the
child seat until tight. Verify that
the buckle retainer lies flat
against the child seat shell.
* Ensure that the buckle strap is
not twisted and that the button
faces out.
9 Replace the belly pad.
a Pull the elastic strap around the
buckle.
b Push the buckle through the belly
pad.
9a
9b
10
10 Attach the hook and loop
fasteners on the head restraint
cover around the harness.
Care and Maintenance Care and Maintenance