Filter
Top Products
28 29
1 Rotate the positioning block
to the front and place the child
seat on the vehicle seat.
* Ensure harness height is adjusted
to fit your child.
2 Position the shoulder part of
the vehicle belt behind the
head restraint.
IMPORTANT: DO NOT route the vehicle
belt under the cover or through the belt
guide on the head restraint.
3 Route the lap and shoulder
parts of the vehicle belt over
the lap belt guide, through the
belt slot, across the back of the
child seat shell, then through
the second belt slot.
4 Verify the vehicle belt is not
twisted, then buckle.
5 Push the child seat firmly into
the vehicle seat while removing
all slack from the lap part (a),
then from the shoulder part (b)
of the vehicle belt.
* Ensure that the vehicle belt is
locked as directed by your vehicle
owners manual.
* The child seat is secure when it
cannot be moved front-to-back
or side-to-side more than 1 in.
(2.5 cm) at the belt path. If the
child seat is not secure, repeat
the installation procedure or use a
different seating location.
6 Firmly press the Versa-Tether® hook to the vehicle tether
anchor to attach. Remove all slack from the tether webbing.
7 Use the elastic strap to contain extra webbing.
3
4
OR
OR
Checklist
9 Check that positioning block is rotated to the front.
9 Check all connections and verify that child seat is secure.
* The child seat is secure when it cannot be moved front-to-
back or side-to-side more than 1 in. (2.5 cm) at the belt path.
If the child seat is not secure, repeat the installation procedure
or use a different seating location.
9 Ensure any excess Versa-Tether
®
webbing is stored in elastic
band. Always ensure any excess webbing is contained within
your vehicle.
Lap Belt – Short Path
Before you begin:
9 Check that your vehicle has a seat belt that can be locked.
* Check your vehicle owner’s manual to determine what type
of vehicle belt you have and how it can be locked for use with
child seats.
9 Check that your vehicle has a top tether anchor?
* Britax recommends that the Versa-Tether is used at all times.
Using the tether will improve the stability of the child seat and
reduce the risk of injury. Check your vehicle owner’s manual for
tether anchor locations.
9 Remove the Versa-Tether
®
hook from the storage clip and
place it over the child seat back to keep it from becoming
pinned between the child seat and vehicle seat during
installation.
Install with the lap belt using only the short belt path as shown
above.
Versa-Tether
®
(Top Tether)
Installing the Child Seat: Harness Mode Installing the Child Seat: Harness Mode