Filter
Top Products
36 37
1 Detach the Versa-Tether
®
hook from the storage clip.
2 Ensure the positioning block
is rotated to the back.
3 Place the child seat on the
vehicle seat and connect the
LATCH connectors to the
vehicle LATCH anchors.
4 Push the child seat into the
vehicle seat and pull the
end of each LATCH strap
through the belt slot to
remove slack.
* Repeat as necessary. Store
excess webbing behind
cover.
Using LATCH
Before you begin:
9 Does your vehicle have a top tether anchor in the chosen seating
position?
9 Does your vehicle have LATCH anchors in the chosen seating position?
IMPORTANT: Use LATCH only to position this child seat to your vehicle
seat. Secure your child using the vehicle’s lap-shoulder belt system.
5 Firmly press the Versa-Tether
®
hook to the vehicle tether
anchor to attach. Remove all
slack from the tether webbing.
6 Use the elastic strap to contain
extra webbing.
* Always ensure any excess
webbing is contained within
your vehicle
7 Use the vehicle’s lap-shoulder
belt to secure your child.
OR
OR
Positioning the Child Seat: Booster ModePositioning the Child Seat: Booster Mode
Lap-Shoulder Belt
1 Ensure that the positioning
block is rotated to the back.
2 Place the child seat on the
vehicle seat and use the
vehicle’s lap-shoulder belt to
secure your child.
Positioning
Block