Filter
Top Products
44 45
Care and Maintenance Care and Maintenance
Cleaning the Cover
•HAND WASH the cover using cold water and mild soap.
•LINE DRY to prevent the cover from shrinking.
•DO NOT:
* Bleach
* Machine wash
* Machine dry
* Iron
Cleaning the Harness
•SPONGE CLEAN the harness using warm water and mild soap.
•TOWEL DRY
•DO NOT:
* Disassemble the harness
* Bleach
* Machine wash
* Machine dry
* Iron
Cleaning the Shell
•SPONGE CLEAN the shell using warm water and mild soap.
•TOWEL DRY
•DO NOT use abrasive cleaners
Replacing the Cover
1 Fit the cover around the head
restraint.
* Be careful not to damage the
energy-absorbing foam.
3
Fit the bottom of the cover
over the lower part of the child
seat shell, then pull the elastic
loops over the hook on the
bottom of the child seat shell.
4 Push the cover under the
lower belt guides.
7 Replace the screw to lock the
head restraint adjuster.
5 Pull the head restraint cover
over the head restraint shell,
and reattach the elastic bands.
* Be careful not to damage the
energy-absorbing foam.
6
Move the harness adjuster to
the highest position (a), then
move the head restraint to the
lowest position (b).
* Ensure that harness slots in
the cover, head restraint and
harness adjuster are aligned.
Cleaning the Side Impact Cushions
•SPONGE CLEAN the cushion using warm water and mild soap.
•TOWEL DRY
•DO NOT use abrasive cleaners
2 Pull the cover fabric tight and
slide it between the child
seat shell and Side Impact
Cushion.
2
8 Pull the buckle through the
slot in the cover.
* Ensure that the buckle is
through the correct cover
slot for the buckle position.
WARNING: Prevent the Side Impact Cushions from
being punctured. Puncture damage will cause the cushions not
to perform as intended.