Filter
Top Products
20 21
WARNING!
• Longbeltpathisonlyforusewithalap-shoulderbelt.Never
usethelongbeltpathoptionwithLATCHoralapbelt.
• Useonly the vehicle’s lap and shoulder belt system when
restraining a child in booster mode. Never restrain a child with
only a lap belt in booster mode..
• Install forward-facing only.
• DO NOT use anything to raise the child seat off of the vehicle seat.
• Refer to your vehicle owner’s manual or contact the vehicle
manufacturer for the maximum weight rating for the LATCH
anchors in your vehicle. Use the vehicle belt (not LATCH
connectors) for installations with children who weigh more than
the vehicle LATCH anchor limit. Unless specified otherwise by
the vehicle manufacturer, assume a 40 lb (18.1 kg) child is the
vehicle LATCH anchor limit.
General Information
Harness Mode
• The positioning block must be
rotated to the front when installing
the child seat in harness mode.
• Based on your vehicle’s seat belt
configuration, you may achieve
a more secure installation
using one of two approved
lap-shoulder belt path options
(long or short belt path). If the
first installation method results in
more than 1 in. (2.5 cm) of front-to-back or side-to-side movement
at the belt path, try the other option. See page 24 for information on
selecting a belt path to install this child seat in your vehicle.
• Use this child seat in harness mode with children at least 2 years of
age and 25 – 85 lbs (11.3 – 38.6 kg) who stand 30 – 57 in. (76.2 –
144.8 cm) in height. Britax recommends using harness mode to 85
lbs (38.6 kg). See the Child Seat Fit Recommendations section on
page 6 for information on when your child has outgrown harness mode.
Positioning
Block
Booster Mode
• The positioning block must
be rotated to the back when
positioning the child seat in
booster mode.
• This child seat can be used in
booster mode with children who
stand 42 – 65 in. (106.7 – 165.1
cm) in height and weigh more
than 40 lbs (18.1 kg). Britax
recommends using harness
mode to 85 lbs (38.6 kg).
• When positioning this child
seat in booster mode use the
vehicle’s lap-shoulder belt to
secure the child and child seat
into the desired seating position.
• In booster mode, this child seat
can be positioned on the vehicle
seat using LATCH. Use the
vehicle’s lap-shoulder belt to secure the child. Ensure that the LATCH
system does not interfere with the vehicle belt function and alignment
when securing your child.
Positioning
Block
Installing the Child Seat Installing the Child Seat