Filter
Top Products
42 43
Care and Maintenance Care and Maintenance
1 Loosen the harness.
a Press release lever
b Pull both harness straps forward
2
Unbuckle the harness, then
move the harness adjuster to
the highest position.
Cover Removal
WARNING!
•Never remove the buckle tongues from the harness.
•DO NOT remove the HUGS™ chest pads from the harness
straps.
•Side Impact Cushions are permanent. DO NOT remove.
3 Remove the screw to unlock
the head restraint adjuster and
raise the head restraint to the
highest position.
* Store the screw in the slot in
the shell.
5
Unhook the elastic bands,
then remove the cover from
the head restraint.
* Be careful not to damage the
energy-absorbing foam.
6
Unfasten the clips behind the
armrests, then pull the cover
from the lower belt guides.
Locking
Screw storage
8 Remove the elastic loops from
the hooks on the bottom of the
child seat, then pull the lower
part of the cover from the
bottom of the child seat shell.
10 Route the cover around the
head restraint and remove the
entire cover from the child
seat shell.
9 Pull the cover fabric from
between the Side Impact
Cushion and child seat shell.
9
7 Remove the belly pad from the
harness buckle.
a Pull the buckle through the belly
pad.
b Remove the elastic strap from
around the buckle.
7a
7b
4
4 Detach the hook and loop
fasteners on the head restraint
cover from around the
harness.