A SERVICE OF

logo

Wired/On-Air Programming
50
Wired Programming
Specifications
USING ON-AIR
P
ROGRAMMING
1. Turn off the scanner.
2. While pressing ENT and 8,
turn on the scanner.
On Air
and PGM appear and the
scanner automatically
receives 154.600 MHz in FM
mode. Then
On Air and the
frequency alternate.
3. Send the data from the PC.
StArt and the data being
received by the scanner
appears in the order it is
received.
Ô
4. Ifyoudonotwanttouse
154.600 MHz to receive
programming, press PGM.
PGM flashes. Then use the
number keys to enter the
frequency you want to receive
and press ENT.
Interface RS-232C
Data Format Asynchronous
Data Length 8-bit
Parity None
Stop Bit 2-bit
Baud Rate 4800 bps
Data
Transmission
Direction
One Way
(Receive Only)
Flow Control None (2 Lines,
RXD and GND)
Ô NOTE Ô
If the scanner did
not receive a start
bit from the PC,
StArt does not
appear.
Ô NOTE Ô
If the scanner did
not receive a start
bit from the PC,
StArt does not
appear.