Understanding the Scanner
18
ALErt
Appears when the weather alert is on.
On Air
Appears when you set on-air programming
mode to program frequencies into your
scanner.
WirEd
Appears when you set wired programming
mode to program frequencies into your
scanner.
StArt
Appears when the scanner starts wired or on-
air programming
C-Err
Appears when the scanner receives a
checksum error during wired or on-air
programming.
d-Err
Appears when the scanner receives a data
error during wired or on-air programming.
End
Appears when the scanner has finished wired
or on-air programming.
oFF tonE
Appears when you turn off the key tone.
on tonE
Appears when you turn on the key tone.
P.-SA
Appears when the power save function is
turned on.
on P.-SA
Appears when you turn on power save.
oFF P.-SA
Appears when you turn off power save.
