Scanning at the Races
37
number. You can store one car
number in each channel (for up to
200 car numbers).
Ô
1. Press CAR. CAR# and CAr
No.
appear and ___
flashes.
2. Enter the car number. If the
number is one or two digits,
enter the number then press
CAR. If the number is three
digits, enter the number only.
The car number and
___
. ___
appear. Ô
3. Enter the frequency (including
the decimal point) you want to
associate with the car number
by using the number keys and
DELAY
/•
.
4. Press ENT to store the
frequency. The car number
and frequency are stored in
the first available channel.
ADDING F REQUENCIES TO
A CAR NUMBER
1. Press CAR. CAR# and CAr
No.
appear and ___
flashes.
2. Use the number keys to enter
the car number if the number
is three digits. If the car
number is less than three
digits, enter the car number
then press CAR.Thecar
number and the first
frequency associated with
that number appear.
3. Repeatedly press ▲ or ▼until
___.___appears.
Ô NOTE Ô
• After you store a
car number and a
frequency, you
can store
additional
frequencies then
associate those
frequencies with
the same car
number. See
“Adding
Frequencies to a
Car Number.”
• If you add one or
more leading
zeros to a single-
digit car number,
your scanner
recognizes them
as different car
numbers. For
example, you can
enter 5 for one car
number, 05 for
another car
number, and 005
for another car
number.
• To clear the
display (if you
make a mistake),
press
CL/MON
before you press
CAR.
