Special Features
43
press L/O/L/O RVW when the
scanner stops on that frequency.
The scanner locks out the
frequency then continues
searching. You can lock out
frequencies in both direct search
and service bank searches.
Ô
Reviewing Locked-Out
Frequencies
To review the frequencies you
locked out, hold down L/O/L/O
RVW for about 2 seconds during a
search, then repeatedly press ▲
or ▼. The scanner beeps if there
are no locked-out frequencies, or
L-r appears and the scanner
displays all locked out frequencies
as you press ▲ or ▼. When you
reach the highest locked-out
frequency, the scanner beeps
twice and returns to the lowest
locked-out frequency.
Removing a Lockout
From a Frequency
1. Start a service bank or direct
search.
2. Hold down L/O/L/O RVW for
about 2 seconds.
L-r
appears.
3. Repeatedly press ▲ or ▼until
the desired frequency
appears.
4. Press L/O/L/O RVW.The
frequency disappears. If there
is another locked-out
frequency, it appears instead.
Or,iftherearenomore
locked-out frequencies,
L-r
000.0000
appears.
Ô NOTE Ô
You can lock out as
many as 50 frequencies
during a search. If you
try to lock out more,
FLo -FULL
appears (see “Reviewing
Locked-Out
Frequencies” and
“Removing Lockouts
From All Frequencies”
on Page 44).
