A SERVICE OF

logo

Open as PDF
next previous
Programming
To change the assignment of lines to pools:
1.
Press [
Feature
] [
0
] [
0
] [
System Program
] [
System Program
] [
#
] [
2
] [
0
] [
7
].
2.
Enter the first line to be programmed. For example, to program line 8, press
[
0 ] [ 8 ]. A display similar to the following appears:
Lines to Pools L08
2 Pool 880
3. Enter the desired value (1–5)—see “Valid Entries” on the previous page.
4.
To program another line, press [
Next Item
] or [
Prev Item
] until the line number
shows on the display. Then repeat Step 3.
5. Select another procedure or exit programming mode.
5-158 Pool Line Assignment (#207)