A SERVICE OF

logo

Open as PDF
next previous
Programming
To change the Line Coverage setting for an extension:
1.
2.
3.
4.
5.
Press [
Feature
] [
0
] [
0
] [
System Program
] [
System Program
] [
#
] [
2
] [
0
] [
8
].
Enter the desired line number. For example, to program line 24, press [ 2 ] [ 4 ].
Enter the number of the extension to be assigned ownership of the line.
At this point:
■
To delete the current setting, press [
Remove
].
■
To program another line, press [
Next Item
] or [
Prev Item
] until the line number
shows on the display. Then repeat Step 3.
Select another procedure or exit programming mode.
Line Coverage Extension (#208)
5-123