Filter
Top Products
19
SERVICING INSTRUCTIONS
SERVICING/FAULT FINDING
1
AR0620
This stove must be serviced at least once a year by a
competent person.
All tests must be serviced by best practice as described by
the current CORGI recommendations.
Refer to ADVICE ON HANDLING AND DISPOSAL OF
FIRE CERAMICS In Installation Instructions section 5
1.1 Before any tests are undertaken on the stove:
• Conduct a gas soundness test for the property to ensure
there are no gas leaks prior to starting work.
1.2 • Fully check the operation of the stove
Special checks
1.2.1 Clean any lint or fluff from the pilot - pay particular
attention to the aeration hole in the side of the pilot
1.2.2 Clean away any fluff or lint from under the burner
1.2.3 Check the spark gap on the pilot is correct
• Correct any faults found during the initial tests
• Re-commission the stove conducting the usual safety
checks
1.3 Advise the customer of any remedial action taken.
1. SERVICING REQUIREMENTS