Filter
Top Products
En
9
Connections and part names
Connecting output terminals
Rear panel
Component, amplifier,
powered speaker, etc.
Power amplifier,
powered speakers, etc.
Power amplifier (for booth monitor),
powered speakers, etc.
R
L
Front panel
Headphones
Cord hook
Hook the USB cable in the top of the cord hook, the AC
adapter’s power cord in the bottom.
Fasten the AC adapter’s power cord and USB cable in place by hooking them on
the cord hook. This prevents the power cord and USB cable from being accidentally
pulled and the plugs from being disconnected from the terminals.
!
Do not fasten with the base of the AC adapter’s power cord bent. If used con-
tinuously under these conditions, the power cord may be damaged, resulting
in faulty contact.
!
The sound will be interrupted if the AC adapter or USB cable is disconnected
during playback.
USB cable
AC adapter’s power cord
Cord hook
Part names and functions
CUE LOOP SAVED LOOP SLICER LOOP
VELOCITY SAMPLER
SLOT
SAVE
START
FLIP
REC
LOOP ON/OFF
4 BEAT
CUE LOOP SAVED LOOP SLICER LOOP
VELOCITY SAMPLER
4 BEAT
SLOT
SAVE
START
FLIP
REC
LOOP ON/OFF
INST.DOUBLES INST.DOUBLES INST.DOUBLESINST.DOUBLES
SYNC OFF SYNC OFF
1 Browser section
2 Deck section
3 Mixer section
4 Effect section
Browser section
INST.DOUBLES INST.DOUBLES INST.DOUBLESINST.DOUBLES
1 1 2 1 1
3 4
1 LOAD button
Press:
The selected tracks are loaded to the respective decks.
! When the [LOAD] button is pressed twice, the tracks loaded in the selected
deck on the opposite side are loaded into the deck whose [LOAD] button was
pressed. When this is done while a track is playing, the track is played from
the same position. (Instant Double)
[SHIFT] + press:
The library’s track list is sorted when one of the [LOAD] buttons is pressed.
: Sorts by track number.
: Sorts by BPM.
: Sorts the track names in alphabetical order.
: Sorts by artist.
2 Rotary selector
Turn:
The cursor in the library or on the [CRATES] panel moves up and down.
Press:
The cursor moves between the [CRATES] panel and library each time the rotary
selector is pressed.
The cursor on the [Files] panel moves to a lower layer.
The cursor on the [Browse] panel moves to the next category.
! For details on the [CRATES] panel, see Importing tracks (p. 15 ).
3 BACK button
Press:
The cursor moves between the [CRATES] panel and library each time the button
is pressed.
If there are sub crates for the item currently selected in the [CRATES] panel,
those crates are expanded or collapsed.
The cursor on the [Files] panel moves to a higher layer.
The cursor on the [Browse] panel moves to the previous category.
[SHIFT] + press:
Switches the Serato DJ layout.
4 LOAD PREPARE button
Press:
Loads tracks to the [Prepare] panel.
[SHIFT] + press:
The panel display switches each time the button is pressed.
Panel display off l Files l Browse l PREPARE l History l Panel display
off.