Filter
Top Products
En
16
2 Press the [PLAY/PAUSE f] button to play the track.
CUE LOOP SAVED LOOP SLICER LOOP
VELOCITY SAMPLER
SLOT
SAVE
START
FLIP
REC
LOOP ON /OFF
4 BEAT
CUE
INST.DOUBLES INST. DOUBLES INST. DOUBLESINST.DOUBLES
SYNC OFF SYNC OFF
3 Move the channel fader away from you.
4 Turn the [TRIM] control.
Adjust [TRIM] so that the orange indicator on the channel level indicator lights at
the peak level.
5 Turn the [MASTER LEVEL] control to adjust the audio level
of the speakers.
Adjust the sound level output from the [MASTER OUT 1] and [MASTER OUT 2]
terminals to an appropriate level.
Monitoring sound with headphones
Set the positions of the controls, etc., as shown below.
Names of controls, etc. Position
HEADPHONES MIX control Center
HEADPHONES LEVEL control Turned fully counterclockwise
1 Press the headphones [CUE] button for the channel 1.
2 Turn the [HEADPHONES LEVEL] control.
Adjust the sound level output from the headphones to an appropriate level.
Note
This unit and Serato DJ software include a variety of functions that allow DJs to cre-
ate highly individualized performances. For details on the respective functions, see
the Serato DJ software manual.
! The Serato DJ software manual can be downloaded from “Serato.com”. For
details, see Downloading the Serato DJ software manual (p. 28 ).
Quitting the system
1 Quit Serato DJ.
When the software is closed, a message for confirming that you want to close it
appears on the computer’s screen. Click [Yes] to close.
2 Press the [STANDBY/ON] switch on this unit’s rear panel to
set this unit’s power to standby.
3 Disconnect the USB cable from your computer.