Filter
Top Products
En
8
Front panel
12 53 4 34
1 PHONES jacks
Connect headphones here.
Both stereo phone plugs (Ø 6.3 mm) and stereo mini phone plugs (Ø 3.5 mm)
can be used.
! There are two input jacks, both a stereo phones jack and a mini phones jack,
but do not use both simultaneously. If both are used simultaneously, when
one is disconnected and/or connected, the volume of the other may increase
or decrease suddenly.
2 HEADPHONES LEVEL control
Adjusts the audio level output from the [PHONES] terminal.
3 INPUT SELECT switch
Selects the input source of each channel from the components connected to
this unit.
— [PC]: Select this to use the track loaded in the Serato DJ software’s deck.
— [MIC1] or [MIC2]: Select one of these to use the microphone connected to
the [MIC1] or [MIC2] terminal.
— [CD]: Select this to use a line level output device (DJ player, etc.) connected
to the [CD] terminals.
4 INPUT SELECT switch
Selects the input source of each channel from the components connected to
this unit.
— [PC]: Select this to use the track loaded in the Serato DJ software’s deck.
— [PHONO]: Selected when using an phono level (for MM cartridge) output
device such as an analog turntable connected to the [PHONO/LINE] input
terminal.
— The sound is muted for approximately 3 seconds when switched to
[PHONO].
— [LINE]: Select this to use a line level output device (DJ player, etc.) connected
to the [PHONO/LINE] input terminals.
5 CROSS FADER CURVE selector switch
This switches the crossfader curve characteristics.
! The further the control is turned clockwise, the sharper the curve rises.
! The further the control is turned counterclockwise, the more gradually the
curve rises.
Connecting the input/output terminals
Connecting input terminals
Rear panel
AUDIO OUT
RL
CON
T
Analog player Analog player
DJ player
DJ player
Computer
Portable audio
device
Portable audio
device
Microphone Microphone
DJ player DJ player
AC adapter
(included)
To power outlet
R
L
R
L
R
L
R
L