Filter
Top Products
Page 6SKU 95852
For technical questions, please call 1-800-444-3353
Attach the Cradle to the Frame
Insert the Cradle Post, which is part of Cradle (42) into the opening in the top of the
Frame (11).
Attach the Cradle to the Frame by rotating the Tilt
Latch (47) over the stud on the Cradle.
Attach the Crossarms to the Cradle
The Crossarms are interchangeable. Slide the
tapered plates on both of the Crossarms (61) into
the receiving sockets on the Cradle (42).
Press each Crossarm into its socket until the spring
tab locks into place.
Testing the Assembly
With assembly completed, check the Panel Lift tool
to be sure all fasteners are tight, the cable is in place and
is undamaged, and the tool is safe to use.
Check the Tripod Base to be sure it is firmly attached to the Frame. Be sure the legs
are firmly extended and locked in place.
Check the Frame Assembly and Winch Assembly
to be sure they are properly installed and function-
ing properly.
Check to be sure the Cradle is properly attached
to the Frame.
Check to be sure the Crossarms are firmly attached
to the Cradle.
CAUTION: Be sure the assembly is properly completed and checked for proper func-
tion before using this tool.
1.
2.
1.
2.
1.
2.
3.
4.