Filter
Top Products
Page 10SKU 95852
For technical questions, please call 1-800-444-3353
Raising the Panel
CAUTION: Always lower the Backstop (7) to prevent
the Lift from rolling whenever raising a panel.
Crank the Winch Wheel (27) forward as shown to raise
the panel to the desired level. You may wish to grasp
the Winch Post (21) for leverage while doing this.
The Brake Hub (33) is spring loaded to hold the panel
in place after cranking.
1.
2.
3.
Lowering the Panel
Grasp the Winch Wheel (27) with your right hand to prevent it turning backwards when
the brake is released.
While holding the Winch Wheel, release the Brake Arm (30) and allow the Winch Wheel
to rotate backward at a controlled rate, to lower the panel.
1.
2.