Filter
Top Products
Page 3SKU 95852
For technical questions, please call 1-800-444-3353
Use eye protection. Always wear ANSI-approved impact safety goggles.
Do not overreach. Keep proper footing and balance at all times. Do not reach over
or across a Panel Lift while in operation. Do not walk or stand under Panel Lift while
in operation.
Maintain tools with care. Keep tools clean for better and safer performance. Follow
instructions for lubricating and changing accessories. The Brake Hub lining must be
kept clean, dry, and free from oil and grease at all times.
Stay alert. Watch what you are doing, use common sense. Do not operate any tool
when you are tired.
Check for damaged parts. Before using any tool, any part that appears damaged
should be carefully checked to determine that it will operate properly and perform its
intended function. Check for alignment and binding of moving parts; any broken parts
or mounting fixtures; and any other condition that may affect proper operation. Any part
that is damaged should be properly repaired or replaced by a qualified technician. Do
not use the tool if any switch does not operate properly.
Replacement parts and accessories. When servicing, use only identical replacement
parts. Use of any other parts will void the warranty. Only use accessories intended for
use with this tool. Approved accessories are available from Harbor Freight Tools.
Do not operate tool if under the influence of alcohol or drugs. Read warning labels
if taking prescription medicine to determine if your judgment or reflexes are impaired
while taking drugs. If there is any doubt, do not operate the tool.
Maintenance. For your safety, service and maintenance should be performed regularly
by a qualified technician.
Stand clear of the Panel Lift when raising or lowering a panel. Never reach through
the winch wheel.
Lift Capacity. Never exceed the Lift’s capacity of 150 lb. Check the manufacturer’s docu-
mentation to determine the actual weight of panels before attempting to lift them.
Never ride on the Panel Lift. Never ride on the Panel Lift, and never have people or
pets in the area while operating lift.
Only use the Lift to raise/lower panels. After raising the panel, immediately fix in
place using the recommended type, number and pattern of nails, adhesive or screws.
Do not use this lift to store panels.
Place Panel Lift on correct surface. Only use this Lift on a stable, level, clean and
dry surface that is capable of sustaining the load.
Stabilize the load. Ensure that the load remains stable at all times. Do not move the
load while it is on the Lift.
Center load. Center the load on the Panel Lift. Off-center loads can topple over caus-
ing property damage or injury.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
21.