Filter
Top Products
Page 13SKU 95852
For technical questions, please call 1-800-444-3353
OPTIONAL EXTENSION ACCESSORY (NOT INCLUDED)
An optional Extension Accessory is available that in-
creases the maximum lift height to 15’, instead of the
standard 11’.
The Accessory includes two 6’ telescoping sections
that replace the standard 4’ sections in the frame. A
longer Cable is included, which must be attached to
the Winch Drum.
To Install the Extension Accessory
Release the cable tension, loosen the cable from the mooring tab
on the side of the Winch. Pull the Cable out through the hole in
the Winch Hub.
Provide some slack in the Cable, and with a large pliers, grasp the
top of the two telescoping units (12, 13) and pull them straight out
of the Frame.
Feed the crimped end of the longer Accessory Cable
into the opening near the top of the Frame Housing.
IMPORTANT: The Cable must be routed over the TOP
of the pulley.
Pull the Cable through the opening, and feed the new
Telescoping Sections down into the Frame.
Feed the free end of the new Cable under and around
the Winch Hub, then through the hole in the Winch
Drum.
Secure the crimped end of the Cable firmly behind the
mooring tab inside the drum.
Rotate the Winch Wheel forward to take up the slack
in the cable.
1.
2.
1.
2.
3.
4.
5.
6.
7.