GTO RB923 rev Safety Gate User Manual


 
6
IMPORTANT SAFETY INSTRUCTIONS
Install Warning Signs
Entrapment Protection
Required Safety Precautions for Swing Gates
Warning Signs
The warning signs (at left) must
be installed on both sides of the
gate (see page 7 for details).
1. KEEP CLEAR! Gate may move at any time.
2. Do not allow children to operate gate or
play in gate area.
3. This gate is for vehicles only. Pedestrians
must use a separate entrance.
Moving Gate Can Cause
Injury Or Death
WARNING
!
Pedestrian Gate
Vehicle Gate
Safety Edge
(recommended / not included)
Safety Edge
(recommended / not included)
Warning Sign
Warning signs alert people of automatic gate operation and are required when installing the GTO/PRO 2000 series gate
operator. Furthermore, a walk-through gate must be installed if pedestrian traffic is expected near the vehicle gate. We
recommend the GTO Bulldog Pedestrian Gate Lock (see Accessory Catalog) for controlled access.
GTO’s internal obstruction settings, even when properly adjusted, may not be sensitive enough to prevent bodily injury in
some circumstances. For this reason, safety devices such as safety edge sensors (or photoelectric sensors), which stop and
reverse gate direction upon sensing an obstruction, are suggested for augmented protection against entrapment in certain
applications.