Filter
Top Products
Pb
Battery Installation
H
Important Note: Use only a Power Wheels
®
12 volt battery.
Use of any other battery will damage your vehicle. Make
sure that you charge the battery for at least 18 hours using
the enclosed Power Wheels
®
12 volt charger before
operating your vehicle for the first time. Charge the battery
for at least 14 hours after each use of the vehicle. Never
charge the battery longer than 30 hours. Failure to follow
these instructions may damage your battery and will void
your warranty. It is easier to install the battery before
assembling the hood to your vehicle. If you have already
assembled the hood to your vehicle, you may want to
remove it to install the battery.
1
2
3
• Lift the hood to access the battery compartment.
Battery
Compartment
Hood
Front of
Vehicle
Pb
24
Pb
Motor
Harness
Connector
Battery
4
Battery
Battery
Clamp
Clip
Locator
Ribs
• Press the battery clamp clip to slide it into the dash .
• While holding the battery clamp clip against the dash,
place the battery in the battery compartment . Make
sure the battery is upright and positioned between the
locator ribs at the bottom of the battery compartment.
11
2
11
1
11
1
11
2
• Plug the motor harness connector into the battery. Push
firmly to make sure the connectors are completely joined.
Helpful Hint: To remove a battery from the battery
compartment, disconnect the motor harness connector from
the battery. Press and hold the battery clamp clip against
the dash and lift the battery from the battery compartment.
Battery
Compartment
Battery
Battery
Clamp
Clip
• Release the battery clamp clip. Make sure the battery
clamp clip slides over the top of the battery. If the battery
clamp clip does not slide over the top of the battery,
reposition the battery in the battery compartment. (See
step 2.)