Fisher-Price 78478 Baby Toy User Manual


 
37
Fit the sport bar and sport bar support legs into the holes
in the vehicle body.
Push down firmly on a sport bar side leg while pulling
up on the side fender to fit the sport bar into the
vehicle body.
Repeat this procedure on the other side of the
vehicle body.
Sport Bar
Side
Fender
PULL HERE
PUSH
HERE
38
Insert a 1
1
/
2
" x
1
/
4
" machine screw into the hole closest to
the front of the vehicle in the underside of the rear wheel
well, through the vehicle body and into the end of the
sport bar.
Tighten the screw with a Phillips screwdriver. Do not
over-tighten.
Repeat this procedure on the other side of the
vehicle body.
Sport Bar
Rear
Wheel
Well
Rear Bumper
Support
Tabs
Face the rear of the vehicle.
Fit the lower rail on the rear bumper over the rear
bumper support.
Gently bend the tabs at the bottom of the rear bumper
under the vehicle.
Rear Bumper
Lower Rail
39
Assembly
21
Light Covers
36
Align the tabs on the inside of a light cover with the slots
in one of the light housings on the light rack. Make sure
the light covers are positioned with the wide spaced tabs
at the top.
Push firmly on the light cover to snap it to the
light housing.
Repeat this procedure on the other side of the light rack
to assemble the other light.
1
1
/
2
" x
1
/
4
"
Screw