Index 3
error messages when halting
CPU fan has failed, 3-21
Disk hung during swap!, 3-21
Error dumping core, 3-21
Halted, 3-21
ISA IOCHK, 3-21
Panicking, 3-21
error or informational messages
CIFS service disabled!, 3-16
Data disk n x% rebuilt, 3-17
disk n is broken, 3-17
Fans stopped; replace them!, 3-18
Fault on shelf n, 3-18
maintenance mode, 3-18
NFS service not enabled, 3-18
Non Maskable interrupt, 3-18
Parity disk is broken, 3-18
Parity disk x% rebuilt, 3-19
Power supply degraded, 3-19
Replace NVRAM batteries!, 3-19
Reporting SNMP traps, 3-20
Setting time from remote host, 3-20
Setting up SNMP trap host, 3-20
x default route, 3-20
x route to y, 3-20
ESD, xi
ESD wrist strap
see electrostatic discharge wrist strap
Ethernet
available network connectivity, 1-4,
2-15
built-in 10/100Base-T Ethernet
interface, 1-4
cabling requirements, 2-16
card LEDs, 3-5
connecting the filer, 2-16
types of cards, 2-16
+
fans
*CPU fan stopped message, 3-11
*Fans stopped message, 3-11
Fans stopped; replace them!
message, 3-18
Fault on shelf n message, 3-18
FC-AL
see Fibre Channel Arbitrated Loop
features
back panel, 1-4
behind front panel, 1-3
front panel, 1-2
fiber cable, GB Ethernet, 2-16
Fibre Channel Arbitrated Loop (FC-AL)
adapter, 1-6, 2-13
adapter slot assignments, 1-8
disk array enclosure (DAE), 1-6
filer-to-disk storage cable, 2-12, 2-13
filer-to-shelf cable, 2-11
interface, 1-5, 2-16
interface with PowerVault F700N DAE
with 18-GB FC-AL disk drives, 1-5
File system may be scrambled message,
3-14
fixing problems, 4-1
FLPY messages
*FLPY format err message, 3-11
*FLPY head err message, 3-11
*FLPY init fail message, 3-12
*FLPY reg error message, 3-12
*FLPY seek err message, 3-11
*FLPY setup err message, 3-11
*FLPY track err message, 3-11
FP button stuck message, 3-12
frequency, electrical requirements, 2-2
front panel, 1-2
!
GB Ethernet card, 1-5
cabling requirements, 2-16
LEDs, 3-8
slot assignments, 1-8
getting help, 4-1
grounding, 2-2
using wrist strap and grounding leash,
2-3