Combi 8100 Car Seat User Manual


 
Place harness straps over child’s shoulders
and thighs.
For information on harness operation and
use, see “Harness Use and Adjustment”
section.
Buckle Harness:
- Place top of buckle tongues together and
insert buckle tongues into buckle (fig. b).
You should hear a click.
- Pull up on tongues to be sure they are
locked.
Pull harness adjuster strap (fig. c) to snugly adjust
harness straps.
- Check that harness straps are snug on
shoulder and thighs. Straps should not
allow a finger to pass between the belt
and the child’s shoulder.
-Asnug harness strap should not allow
any slack. It lies in a relatively straight
line without sagging. It does not press
on the child’s flesh or push the child’s
body into an unnatural position.
NOTE: If harness can not be snugly
adjusted as described above,
do not use this car seat.
43
4
5
6
(fig. b)
Click
(fig. c)
Harness
Adjuster
Strap
Pull
44
Close chest clip and position chest clip at
arm pit level (fig. d).
Small infants:
For a small infant, a rolled towel can be used on
each side for support (fig. d). Towels MUST not
interfere with the ability to snugly adjust the
harness system. DO NOT place towel or
other items behind infant or between infant
and harness.
(fig. d)
Chest Clip
Rolled Towel
7