Filter
Top Products
39
Check for secure installation. Gripping car seat
at top of armrest, pull car seat front to back and
left to right to check for secure installation (fig. g).
Vehicle lap belt MUST stay tight.
If the vehicle lap belt does not stay tight or
car seat can not be securely installed, check
that arrow on belt lock-off is pointing toward
buckle, see vehicle owner’s manual , “Vehicle
Seat Belts” section or move to a different
seating location.
Attach top tether hook (A) to vehicle top tether
anchor hardware (B) (fig. h) and pull strap to
tighten top tether removing any slack.
If top tether anchor (B) is not available in
vehicle, see vehicle owner’s manual or
Top Tether Information in “Selecting A vehicle
Seating Location” section.
(fig. g)
(B)
(A)
Pull to
tighten
(fig. h)
12
13
40
Removal Of Car Seat Installed W
ith Vehicle Seat Belt:
Tip belt adjuster to loosen top tether strap
(fig. i).
Depress retainer spring and unhook
tether hook from vehicle top tether anchor
(fig. j).
Unbuckle vehicle seat belt.
- Pressing down in center of car seat to
reduce tension on vehicle seat belt will
make it easier to loosen vehicle seat belt.
Open belt lock-off and remove vehicle
seat belt from belt path.
1
2
3
4
(fig. i)
1
2
Belt
Adjuster
Tether
Hook
Retainer
Spring
(fig. j)
1
2