Filter
Top Products
Adjust car seat to desired recline position
1, 2 or 3.
-To change recline position, see “Recline
Position Adjustment” section.
Lift front belt flap on pad and release
belt access cover by lifting cover
(fig. b).
Arrow on red belt lock-off (fig. b) MUST
point toward the vehicle seat belt buckle
that will be used to secure the vehicle belt.
If the arrow is not pointing toward the
vehicle buckle, rotate the belt lock-off
until the arrow is pointing toward the buckle.
With arrow pointing toward the vehicle buckle
that will be used to secure the vehicle belt,
open red belt lock-off (fig. c).
To open:
- Lift locking tab .
- Lift lock-off cover .
37
1
2
5
6
7
8
(fig. b)
1
1
(fig. c)
1
2
Belt Lock-off
Open
Thread vehicle lap belt or vehicle lap and
shoulder belts through forward-facing belt
path (fig. d):
- Thread vehicle seat belt through
forward-facing belt path openings
and place vehicle seat belt across
belt lock-off .
- Buckle seat belt and remove any slack in
the vehicle seat belt. Be sure vehicle seat
belt is not twisted.
Tighten vehicle seat belt to secure the
car seat.
- Press down in center of car seat
to depress the vehicle cushion while
tightening vehicle seat belt (fig. e).
Close belt lock-off over lap or lap and
shoulder belt (fig. f).
To close:
- Push down lock-off cover .
- Then push down locking tab .
38
1
9
1
2
(fig. f)
2
(fig. d)
1
2
10
2
1
11
(fig. e)