Filter
Top Products
Removal Of Car Seat Installed With LATCH:
Loosen lower anchor belt by depressing belt
adjuster slide button and pulling out lower
anchor belt.
- Pressing down in center of car seat to reduce
tension on lower anchor belt will make it
easier to loosen lower anchor belt.
Remove hook-on connectors from vehicle
anchors.
- Press and hold the connector retainer spring .
- Push connector in, then rotate connector ,
and pull out to unhook from the vehicle
anchor (fig. j). If the connector can’t be
rotated, push in and lift the connector to
unhook from the vehicle anchor.
- Repeat to remove hook-on connector on
opposite side.
23
1
2
1
2
3
(fig. j)
2
1
3
24
Storage Of Lower
Anchor Belt And Connectors:
When not using the LATCH System, store the
lower anchor belt and hook-on connectors by
snapping the connectors onto LATCH
connector storage rings located on the
back side of the seat pad (fig. k).
Pull on free end of lower anchor
belt to tighten.
NOTE:To prevent damage to the seat
pad, care should be taken when
removing or securing connectors.
Excessive force could damage
or tear seat pad.
(fig. k)
LATCH
Connector
Storage Ring