Filter
Top Products
Features
&
Controls
To
Reduce Speed While Using
Cruise Control
There are two ways to reduce your
speed while using cruise control:
Push in the button at the end of the
lever until you reach the lower speed
you want, then release
it.
To
slow down in very small amounts,
push the button for less than half a
second. Each time you do this, you’ll
go
1
mph
(1.6
km/h)
slower.
Passing Another Vehicle While
Using Cruise Control
Use the accelerator pedal to increase
your speed. When you take your foot
off
the pedal, your vehicle will slow down
to
the cruise control speed you set
earlier.
Using Cruise Control
on
Hills
How well your cruise control
will
work
on
hills depends upon your speed, load,
and the steepness of the hills. When
going
up
steep hills,
you
may have to
step on the accelerator pedal to
maintain your speed. When going
downhill, you may have to brake or
shift to a lower gear to keep your speed
down. Of course, applying the brake or
clutch pedal takes you out of cruise
control. Many drivers find this to be too,
much trouble and don’t use cruise
control on steep hills.
To
Get
Out
of
Cruise Control
There are several ways to turn
off
the
cruise control:
Step lightly
on
the brake pedal, or
push the clutch pedal,
if
you have a
manual
transaxle;
OR
Move the cruise switch to
OFF.
To
Erase Cruise Speed Memory
When you turn
off
the cruise control or
the ignition, your cruise control set
speed memory is erased.
Inside Manual DaylNight
Rearview Mirror
To reduce glare from lights behind you,
move the lever toward you to the night
position.