Filter
Top Products
Comfort
Controls
&
Audio
Systems
1.
Tune in the desired station.
2.
Press
SET.
The word
SET
will
appear on the digital display for five
seconds.
3.
While
SET
is displayed, press one
of
the four pushbuttons. Whenever you
press this button again, the preset
station will be tuned in.
4.
Repeat steps
1-3
for each of the four
AM
and four
FM
stations.
Up to three additional stations on each
band may be preset by “pairing”
pushbuttons:
1.
Tune in the desired station.
2.
Press
SET,
and within five seconds
press any two adjacent pushbuttons
at the same time. Whenever you press
these buttons again, the preset
station will be tuned in.
AUTO
DNR:
This unit is equipped
with an automatic Dynamic Noise
Reduction system that reduces
background hiss on
AM
or
FM
radio
broadcasts, as well as on cassette tapes.
Cassette Tape Player
With the power on, insert a tape into
the cassette door.
Do
not use tapes that
are longer than
45
minutes on each side.
When the left arrow is lit, selections
listed on the top side of the cassette are
playing. When the right indicator arrow
is lit, selections listed on the bottom
side of the cassette are playing. To
change sides
of
the tape, press the
upper control knob
(PROG)
while the
cassette is playing. The tape player
automatically begins playing the other
side when it reaches the end
of
the tape.
Fast
Forward
Press the button with
the arrow pointing in the same direction
that the tape is playing. To stop fast
forward, press the
STOP-EJECT
button.
Reverse:
Press the button with the
arrow pointing in the opposite direction
that the tape is playing. To stop reverse,
press the
STOP-EJECT
button.
STOP-EJECT:
To
stop playing a tape,
fully press this button (the cassette will
be partially ejected, and the radio will
begin playing).