Filter
Top Products
Features
&
Controls
The high beam headlights will come on
at reduced brightness in daylight when:
The ignition is on
The headlight switch is
off,
and
The parking brake is released.
When you turn on your headlights, the
DRL
will switch
off
and the exterior
lights will come on. When you turn off
the headlights, the exterior lights will go
out and the high beams will change to
the reduced brightness
of
DRL again.
The DRL indicator light on the
instrument panel will go on whenever
the DRL are on. This light means that
only the DRL are on. When you turn on
your exterior lights, this light will go
out. Of course, you may still turn on the
headlights any time
you
need
to.
To
idle your vehicle with the DRL off,
set the parking brake. The
DRL
will
stay
off
until you release the parking
brake.
J
Headlight High-Low Beam
Changer
To change the headlights from low
beam
to
high
or
high to low, pull the
turn signal lever all the way toward you.
Then release it. When the high beams
are on, a blue light on the instrument
panel also will be on.
Flash-to-Pass
(EXCEPT CANADA)
Flash-to-Pass lets you use your high
beam headlights to signal a driver in
front
of
you that you want to pass.
To use it, pull the turn signal lever
toward you, then release.
If
Your
Headlights
Are
Off
Your high beam headlights will turn on.
They’ll stay on
as
long as you hold the
lever there. Release the lever to turn
them off.
If
Your
Headlights
Are
On:
Flash-to-Pass does not operate when
your headlights are on. Use the lever to
change between high and low beams.