Filter
Top Products
8.
Near each wheel well is a notch in
the frame which the jack head fits in
(A).
The front notch is
9"
(23
cm)
back from the rear wheel well. The
rear notch is
8"
(20
cm) forward from
the rear wheel well.
If
your vehicle
has flared side moldings, both front
and rear notches are
18"
(46
cm)
from the wheel wells.
I
~~ ~ ~~
9.
Position the jack under the vehicle.
Raise the jack head until
it
fits firmly
into the notch in the vehicle's frame
nearest the flat tire.
Do
not raise the
vehicle yet. Put the compact spare
tire near you.
NOTICE:
Raising your vehicle with the jack
improperly positioned will damage
the vehicle or may allow the vehicle
to fall off the jack. Be sure to fit the
jack lift head into the proper
location before raising your vehicle.
NOTICE:
Do
not jack or lift the vehicle using
the oil pan. Pans could crack and
begin to leak fluid.
10.
Raise the vehicle by rotating the
jack handle cloclnvise. Raise the
vehicle far enough off the ground
so
there is enough room for the spare
tire to fit.
11.
Remove all
of
the wheel nuts and, if
you
have a wheel cover, use your
fingers to carefully pry the wheel
cover from the wheel. Then take off
the flat tire.
149
I