Filter
Top Products
Service
&
Appearance Care
2.2L L4: Checking Automatic
Transaxle Fluid
3.1
L
V6: Checking Automatic
Transaxle Fluid
.
168
How
to
Add
fluid
Refer to the Maintenance Schedule to
determine what kind of transaxle fluid
to use. See
Recommended Fluids
and
Lubricants
in the
Index.
If
the fluid level
is
low,
add only enough
of
the proper fluid to bring the level into
the cross-hatched area
on
the dipstick.
1.
Pull out the dipstick.
2.
Using a long-neck funnel, add
enough fluid at the dipstick hole
to
bring it to the proper level.
It doesn’t take much fluid, generally less
than a pint
(0.5L).
Don’t
overfill.
We
recommend you use only fluid labeled
DEXRONo-111 or DEXRONB-HE,
because fluids with that label are made
especially for your automatic transaxle.
Damage caused by fluid other than
DEXRONO-I11
or
DEXRONB-IIE is not
covered by your new vehicle warranty.
After adding fluid, recheck the fluid
level as described under
How
to
Check.
obtained, push the dipstick back in
all
the
way.
When the correct fluid level
is
2.2L L4: Adding Automatic Transaxle
Fluid
3.1
L V6: Adding Automatic Transaxle
Fluid