Filter
Top Products
Features
&
Controls
RUN
.Ignition
Switch
With the ignition key in the ignition
switch, you can turn
the
switch
to
five
positions:
Accessory:
An
“on”
position in which
you cm operate your electrical power
accessories. Press
in
the ignition switch
as you turn the top
of
it
toward you.
Lock
The only positiop in which you can
remove the key. This locks your steering
wheel, ignition and transaxle.
Off:
,Unlocks the steering wheel, ignition
and transaxle, but does not send electrical
power to any accessories. Use
this
position
if
your vehicle must be pushed
or
towed,
but
never
try
to push-start your vehicle.
A
warning
chime
will
sound
if
you
open
the driver’s door when the ignition
is
off
and the key is
in
the ignition.
Run:
An
“on”
position to which the
switch returns .after you start your
engine and release’the syitch. The
switch stays
in
the
Run
position when
the engine
is
running. But even when
the engine is
not
running,
you can use
Run
to operate your electrical power
accessories, and
to
display
some
histru-
ment panel WarningJights.
Stark
Starts the engine. When the
engine starts, release the key. The
ignition switch will return to
Run
for
normal driving.
Note that even
if
the engine is not
running, the positions
Accessory
and
Run
are
“qd’
positions’that
allow
you
to operate your electrical accessories,
such as .the radio.
NOTICE:
I.
If
your key seems
stuck
in
Lock
and
you can’t turn it, be sure
it
is all the
way
in.
If
it
is, then turn the steering
wheel le&’and right while you
iurh
the key hard. But turn the key only
with your hand. Using
a
tool to
force it could break the key or the
ignition switch.
If
none
of
this
works,
then your vehicle needs service.
50